PerfSaver®

Posted by Admin on
Minimize Clay Swell and Fine Migration

Maximize oil and gas production in your hydraulic fracturing with our high performing clay stabilization product! Combined with your fracking fluids, PerfSaver helps to maintain the integrity of your fracture networks to ensure maximum well productivity.

The addition of liquid PerfSaver to frac make-up water simplifies your process compared to dissolving solid clay stabilizers. The PerfSaver helps minimize clay swelling and swelling-induced fine migration in order to preserve fracture and matrix permeability.

Benefits:

  • Reduce Costs
  • Maximize Oil and Gas Production
  • Minimize Risk of Well Impairment
  • Compatible with Frac Make-up Water

The EnviroTech Research & Development lab can analyze your well cuttings, inform your drilling personnel if clay stabilizer is needed, and if so, provide the optimal composition of clay stabilizer in the drilling fluid.

PRODUCT RESOURCES


RoadSaver®-C

Posted by Admin on
An odorless and colorless brine solution that can be used as a cost effective dust palliative and road stabilizer

The natural hygroscopic properties of RoadSaver®-C aids in retaining moisture and significantly improve dust control and support soil stabilization. RoadSaver®-C acts as a binder that holds fine particles and aggregate together resulting in a hard compact surface. The following four factors work together to achieve optimum results:

  • Quality and Composition of Aggregate
  • Road Prep
  • Compaction
  • Application rate

Dust Control
Topical Applications work well for dust control needs. Application rates are determined by the concentration of the calcium chloride, the aggregate used, climate, and the amount of traffic. Treated roads hold fines longer and promote compaction resulting in lower maintenance. Our knowledgeable sales staff can assist you in assessing your road conditions and application needs.

Road Stabilization
For stabilization, the application methods can vary, depending on climate, road base, budgetary concerns and equipment. Our sales staff is up to date on the latest methods and will work with you to create a stabilization program. Stabilization applications can be used prior to chip seals or asphalt overlays to create a longer lasting surface.

Environmentally Friendly
Treated roads produce less dust, leading to improved public safety, lower impact on nearby crops and higher air quality for local residents. RoadSaver®-C (calcium chloride) is one of the most environmentally friendly dust control agents on the market, receiving the lowest toxicity rating among dust abatement products.

PRODUCT RESOURCES


RoadSaver®

Posted by Admin on
RoadSaver is a high purity grade of Magnesium Chloride (MgCl2) used as a dust control and road stabilization agent

RoadSaver is a hygroscopic compound that attracts moisture from the air and resists evaporation. Roadsaver binds fine dust and aggregate to keep surfaces stable and dust free.

  • Used on cities, counties and haul roads
  • Feed lots
  • Construction areas
PRODUCT RESOURCES


BaseBind®

Posted by Admin on
A soil stabilizer and road base additive to save your road base

BaseBind can be mixed into a variety of road bases, including recycled asphalt, or applied topically depending on the goals of the application. BaseBind was developed by ESI’s R&D lab to address how the benefits of lignosulfonate could be replicated without being solely reliant on the diminishing supply sources, and the other disadvantages of working with the highly viscous product. Like any properly developed product, EnviroTech spent extensive time and resources testing BaseBind to ensure its performance and veracity. BaseBind compliments ESI’s Compact & Cap™ program, a custom approach to optimizing road maintenance performance.Whether extending the life of a road, managing a construction project, or maintaining a drilling pad, BaseBind can be tailored to meet your needs. Please download the brochure and contact us to learn more about how BaseBind can serve your needs.

PRODUCT RESOURCES


X-Hesion® Pro

Posted by Admin on
Ultra-low chloride based formulations utilizing agriculturally derived, complex organic polymer

These polymers function to keep the surfaces of several types of road base stable and dust free while maintaining a road surface that is flexible and water resistant. X-Hesion Pro is an ultra-low chloride based dust control product that helps to limit the amount of chlorides introduced into the environment versus traditional dust palliatives. The enhanced X-Hesion Pro formulation is both more effective at drawing/retaining moisture and is more weather resistant. The result is a stronger fine particle – aggregate matrix that reduces dust to a PM10 standard and yields a road surface that is compact, water resistant and durable.

Road surface preparation is extremely important in all application techniques. However, these preparations do not need to be time consuming or costly. The better the road conditions, the more successful the application will be.

The following four factors work together to achieve optimum results:

  1. Quality and Composition of Aggregate
  2. Road Preparation
  3. Compaction
  4. Application

X-Hesion Pro can be used on the following surfaces:

  • Unpaved state, county and township roads
  • Quarries/mine/haul roads
  • Orchards/agricultural roads
  • Federal/state parks
  • Military roads /federal projects
  • Private and rural roads
  • Parking lots
  • Tree/flower/shrub nurseries
  • Airfields and helicopter pads
  • Feedlots

“X-Hesion Pro has made our dust control measures and program more cost effective without a large change to the processes.”

-Grant Smith, Manager at Transit Mix Aggregates-Daniels Sand Division

PRODUCT RESOURCES


DuraBlend®-C

Posted by Admin on
Effective for road maintenance as well as mining, oil & gas

DuraBlend-C achieves the same performance as a typical chloride treatment, but can require half the amount of product per application. DuraBlend-C’s enhanced polymer blend helps it bond to the aggregate, lowering migration of chloride from the road to improve friction in moisture situations and provide for safer driving surfaces.

Road preparation for DuraBlend-C application is the same as for a typical chloride product, including rolling after grading is finished. This process provides for optimal surface penetration of DuraBlend-C into the top half inch of the road and improves fleet efficiency.

This product is applied to roads using the standard spray system, but can cover twice as much area per truck load than full chloride products. It does not require blade mixing to extend performance. Continual use reduces road base loss and improves the efficiency of the fleet, reducing man hours.

PRODUCT RESOURCES


DuraBlend®

Posted by Admin on
A full chloride product most prominent for dust control and road stabilization in North America

DuraBlend achieves the same performance as a typical magnesium chloride treatment, but can require half the amount of product per application. DuraBlend’s enhanced polymer blend helps it bond to the aggregate, lowering migration of chloride from the road to improve friction in moisture situations and provide for safer driving surfaces.

With more scrutiny coming from local municipalities and concerns of neighbors makes products that reduce chlorides advantageous in managing these relationships.

Road preparation for DuraBlend application is the same as for a typical chloride product, including rolling after grading is finished. This process provides for optimal surface penetration of DuraBlend into the top half inch of the road and improves fleet efficiency. When a pad or site is being set up, the application of DuraBlend can greatly ease dust management, once operations begin.

DuraBlend is applied to roads using the standard spray system, but can cover twice as much area per truck load than full chloride products. It does not require blade mixing to extend performance. Continual use reduces road base loss and improves the efficiency of the fleet, reducing man hours.

PRODUCT RESOURCES


Compact & Cap®

Posted by Admin on
ESI’s proprietary program that combines product mix and application method for optimal performance and value

Whether managing roads, a construction site, a drilling pad, or another project requiring dust control, you know that your greatest challenge is balancing your particular mix of conditions and resources. EnviroTech has been accounting for the specific details of a site’s environment since our inception, and have also become experts in helping our customers manage their limitations in equipment and resources. This expertise has come together with a nuanced application of our proprietary products to form our trademarked Compact & Cap program.

Compact & Cap combines a customized mixture of ESI’s proprietary products with an application method tailored to the equipment, resources, and environment for the job at hand. The comprehensive approach of Compact & Cap means that a site gets improved stabilization, along with the suppression of dust. Download the FAQ below to learn more about what goes into the program, at a high level. Because the site or project each manager has to work with requires such a customized approach, the best way to get a more detailed understanding of Compact & Cap is to contact us. We look forward to working with you to reach your best possible results.

PRODUCT RESOURCES


Nature’s Best®

Posted by Admin on
A blend of natural granular and liquid deicer products, safe for concrete, asphalt, metal, animals and vegetation

Nature’s Best is created through the application of a high-performance liquid deicer to granular ice-melt using “pre-wetting” technology and concepts currently in use by major government and commercial deicing operations. Through this pre-wetting process, granular ice-melt performs better, melts faster and lasts longer.

For best results, remove any existing loose snow and slush from driveways, steps and walkways prior to application of ice-melt. Evenly sprinkle Nature’s Best on desired surfaces. Melting should begin immediately. Once snow and ice have sufficiently melted, shovel off slush. Thick accumulations may require additional application. Nature’s Best may also be kept in cars and trucks for use any time when traction is needed.

Unique color enhances performance. The unique color of Nature’s Best serves as a guide to where and how much has been applied. Usage is generally half as much and half as often as compared with other deicers. The blue color absorbs heat from the sun on cold sunny days to help the melting process.

Do not use on concrete that is less than one year old, or that was not properly mixed, finished, or cured. Flaking or spalling may occur when using any ice-melting product on concrete surfaces, especially those that are poorly constructed, contain porous concrete or act as a mortar joints between bricks and flagstone. When used in these situations, Nature’s Best should cause less damage than most other deicers and will reduce the number of concrete freeze/thaw cycles, which also greatly contributes to concrete damage.

PRODUCT RESOURCES