Landfill

KEEP THE ROAD MATERIALS ON THE ROAD

BaseBind-X—EnviroTech’s advanced soil stabilization solution—is now a superior option for stabilizing your roads. BaseBind-X can be mixed into a variety of road bases. Mix with water on sight and BaseBind-X can be offered in two other variations, 2X and 3X, variations which can be used as freight saving formulas.

BaseBind-X keeps the road materials on your roads and keep you from having to constantly add more material to grading your roads after wet weather. BaseBind-X products allow the road to be repaired, reworked or graded without destroying the effectiveness of the stabilizers.

GOOD: Basebind-X – Proprietary Blend

• Proprietary blend formula for superior road stabilization
• Ready to apply formula

BETTER: Basebind-2X – Concentrate

• Proprietary blend formula for superior road stabilization
• Concentrated version of BaseBind-X
• Can be stored in tanks or totes
• Mix with equal parts of water before application

BEST: Basebind-3X – Super Concentrate

• Proprietary blend formula for superior road stabilization
• Super concentrated version of BaseBind-X
• Can be stored in tanks or totes
• Mix with up to four parts water before application

Client Testimonial:

– Monte Hankins, County Superintendent for Elbert County, Colorado

A full chloride product most prominent for dust control and road stabilization in North America

DuraBlend achieves the same performance as a typical magnesium chloride treatment, but can require half the amount of product per application. DuraBlend’s enhanced polymer blend helps it bond to the aggregate, lowering migration of chloride from the road to improve friction in moisture situations and provide for safer driving surfaces.

With more scrutiny coming from local municipalities and concerns of neighbors makes products that reduce chlorides advantageous in managing these relationships.

Road preparation for DuraBlend application is the same as for a typical chloride product, including rolling after grading is finished. This process provides for optimal surface penetration of DuraBlend into the top half inch of the road and improves fleet efficiency. When a pad or site is being set up, the application of DuraBlend can greatly ease dust management, once operations begin.

DuraBlend is applied to roads using the standard spray system, but can cover twice as much area per truck load than full chloride products. It does not require blade mixing to extend performance. Continual use reduces road base loss and improves the efficiency of the fleet, reducing man hours.

The same trusted DuraBlend product with CALCIUM and enhanced polymers

The same trusted DuraBlend product you know and love with a slight addition of enhanced polymers. A dust control product that reduces chlorides into the environment and maintains quality and customer application. DuraBlend-CEP is calcium chloride based with enhancing polymers, which reduces chlorides leaching into the environment.

What sets DuraBlend-CEP Apart?

• Absorbs Faster: 80% faster absorption time
• Reduces Chlorides Leaching into the Environment: Calcium chloride based with enhancing polymers
• Same Dust Control: Same as standard chloride, resulting in seamless transition from your current dust control product and program
• Application Rate Match: Typically matches the current application rate between 0.20 and 0.30 gallons per square yard
• Same Road Preparation: Uninterrupted application method to current product and program

The same trusted DuraBlend product with magnesium and enhanced polymers for low-temp applications

DuraBlend has been modified so that it can be applied in lower temperatures. This has significance for counties that apply dust control early in the spring and late in the fall. DuraBlend-MEP is magnesium chloride based with enhancing polymers, which reduces chlorides leaching into the environment.

What sets DuraBlend-MEP Apart?

• Absorbs Faster: 80% faster absorption time
• Reduces Chlorides Leaching into the Environment: Magnesium chloride based with enhancing polymers
• Same Dust Control: Same as standard chloride, resulting in seamless transition from your current dust control product and program
• Application Rate Match: Typically matches the current application rate between 0.20 and 0.30 gallons per square yard
• Same Road Preparation: Uninterrupted application method to current product and program

DuraBlend-MEP achieves the same performance as a typical chloride treatment, but can require half the amount of product per application. DuraBlend-MEP’s enhanced polymer blend helps it bond to the aggregate, lowering migration of chloride from the road to improve friction in moisture situations and provide for safer driving surfaces.

A PROPRIETARY BLEND FORMULA CONTAINING DESICCANTS AND SURFACTANTS FOR DUST SUPPRESSANT

Road surface preparation is extremely important in all application techniques. However, these preparations do not need to be time consuming or costly. The better the road conditions, the more successful the application will be. The following four factors work together to achieve optimum results:

• Quality and composition of aggregate
• Road preparation
• Compaction
• Application rate

Features & Benefits

• Allows for cleaner air and reduces dust to PM10 Standard
• Improves road quality with fewer potholes and less wash-boarding
• Ensures public safety
• Reduces road maintenance while creating more value for the dollar
• Can be used on many soil types

Ultra-low chloride based formulations utilizing agriculturally derived, complex organic polymer

These polymers function to keep the surfaces of several types of road base stable and dust free while maintaining a road surface that is flexible and water resistant. X-Hesion Pro is an ultra-low chloride based dust control product that helps to limit the amount of chlorides introduced into the environment versus traditional dust palliatives. The enhanced X-Hesion Pro formulation is both more effective at drawing/retaining moisture and is more weather resistant. The result is a stronger fine particle – aggregate matrix that reduces dust to a PM10 standard and yields a road surface that is compact, water resistant and durable.

Road surface preparation is extremely important in all application techniques. However, these preparations do not need to be time consuming or costly. The better the road conditions, the more successful the application will be.

The following four factors work together to achieve optimum results:

1. Quality and Composition of Aggregate
2. Road Preparation
3. Compaction
4. Application

X-Hesion Pro can be used on the following surfaces:

• Unpaved state, county and township roads
• Quarries/mine/haul roads
• Orchards/agricultural roads
• Federal/state parks
• Military roads /federal projects
• Private and rural roads
• Parking lots
• Tree/flower/shrub nurseries
• Airfields and helicopter pads
• Feedlots

“X-Hesion Pro has made our dust control measures and program more cost effective without a large change to the processes.”

-Grant Smith, Manager at Transit Mix Aggregates-Daniels Sand Division